Installing the Display on the Wall Attachment Panel
➢ The exterior of the PDP may be different than the picture. | ENG |
(Assembly and installation of the plastic hanger is the same.) |
1Remove the screws from the back of the PDP.
2Use the screws and assemble the plastic hanger.
☛◆ Please ask the installers to install the wall mount bracket.
◆Please be sure to check if the plastic hanger is completely secured on both the left and right side after hanging the PDP on the wall mount bracket.
◆Please avoid catching your fingers while installing and adjusting the angle.
◆Please tightly secure the wall mount bracket to the wall to avoid injury from a falling PDP.
3Tighten the screws of the plastic hanger to the back side of the PDP.
4Put the 4 pegs on the PDP in the grooves of the wall mount bracket and pull down on the PDP (!) to secure it to the wall mount bracket (@). Tighten the screws as shown (#) so that the PDP cannot be separated from wall mount bracket.
PDP panel
Wall
Wall attachment panel bracket
13
