Samsung Q1 manual Q5 The shortcut icons are not displayed on the screen

Q4 When I connect a projector, and change the settings to display the screen image on both the LCD and the projector by pressing the Menu button, the screen is not displayed properly.

APress the Menu button and press the LCD/CRT twice to select LCD+CRT. If the screen image or some part of it is not displayed on the screen, this is because the LCD resolution is low or the current resolution is too wide and cannot be supported by the projector. Press the Auto Scaler button and change the resolution to 800x600 pixels.

Q5 The shortcut icons are not displayed on the screen.

AThe shortcut icons only appear when both the Magic Keyboard and Samsung Display Manager programs are installed.

Q6 When I connect an external monitor and select the monitor, no screen image is dis- played (Clone Mode).

AThis may happen when the current resolution is inappropriate or Dual View (Extended Mode) is selected. Try the following methods.

1. When the current resolution is inappropriate

This computer supports the 800x480 WVGA resolution. Since this resolution is lower than that of the operating system, the above symptom may appear when the external monitor cannot support this resolution. Change the resolution to 800x600 pixels, press the Menu button and press the LCD/CRT twice to select LCD+CRT.

2. When Dual View (Extended mode) is selected

When Dual View is selected, the Clone Mode is not supported. In this case, unselect the Dual View, press the Menu button to select the Clone Mode.

For the procedures to deactivate the Dual View, refer to ( p.35).

Q7 In the Display Properties window, resolution starts from 800x600.

AEven if the current resolution is 800x480 pixels, it may be represented as 800x600 in the Dis- play Properties. This is because the lowest resolution of the operating system is 800x600 and is unable to show the 800x480 resolution in the Display Properties window.

Q8 Pressing [Start] displays a [Some items cannot be shown] message.

AThis message appears when all start menu items cannot be displayed in the default resolution (800x480 pixels). In this case, change the screen resolution to 800x600 pixels or press the Auto Scaler button to change the resolution.

Q9 The whole screen image is not displayed on the screen.

AThis may happen when a program or game is designed for at least 800x600 pixels. In this case, press the Auto Scaler button and change the resolution. Whenever the button is pressed, the screen resolution changes to 800X480 > 800x600 >1024x600 pixels, in this sequence.

Q10 When I press the Auto Scaler button, letters on the screen are blurry.

AIn resolutions provided by Auto Scaler, the letters on the screen may be blurred because these are not the optimal resolutions of the LCD panel.

In this case, press the Auto Scaler button again and change the screen resolution to 800x480 pixels which is the default resolution of the LCD panel.

Questions and Answers 127