Samsung manual Wired LAN Related, Q1 The Wake On LAN function

Wired LAN Related

Q1 The <Wake On LAN> function

A<Wake On LAN> is a function that activates the system from standby (S3) when a signal (such as ping or magic packet commands) arrives from the network (wired LAN).

Using the <Wake On LAN> function

z Click on My Network Place> View network connections on the Desktop.

xRight-click(press and hold the Stylus Pen for more than 3 seconds) the Local Area Connec- tion and click Properties.

cClick Configure, and select the Power Management tab. Select 'Allow this device to bring the computer out of standby', then click OK. Restart the system.

-If the system in standby mode is activated when there is no received signal, use the system after disabling the <Wake On LAN> function.

-When turning the power off when <Wake On LAN> is disabled, the LAN LED may continue to be lit up.

-The <Wake On LAN> function operates only when the LAN is ON.

-Connecting a wired LAN while using a wireless LAN may not activate the <Wake On LAN> function. Set the Wireless LAN to 'Disable' to use the <Wake On LAN> function.

z Click on My Network Place> View network connections on the Desktop.

xRight-click(press and hold the Stylus Pen for more than 3 seconds) over Wireless Net- work Connection and select Disable.

Q2 When I am connected to a 100Mbps wired LAN and the computer exits standby/ hibernation mode, a message appears informing of a connection to a 10Mbps wired LAN.

AWhen the computer exits standby/hibernate mode, restoring the network takes about 3 sec- onds. When the network is restored, it operates at 100Mbps.

Q3 To use the network at the maximum data rate, configure the following options.

AClick Start > Control Panel > Performance and Maintenance > System > Hardware > Device Manager > Network adapters and Right-click(press and hold the Stylus Pen for more than 3 seconds) Marvell Yukon88E8036 PCI-E Fast Ethernet Controller and click Properties > Advanced.

Configure as follows and click the OK button.

zBatteryModeLinkDetection : EnergyDetect™ x BatterySpeedSettings : FullSpeed

Questions and Answers 129