INSTALLING THE APPLIANCE
Selecting the location for appliance.
• Install the appliance SURSHUO\RQWKHÁDWDQG
ÀUPVXUIDFH
- Stand table option model can not be adjustable for the height of appliance.
Install appliance in the available space.
• Allow 1 foot (30cm)
from the ceiling, and 2 inches (5 cm) from
the wall.
Install appliance in the appropriate location.
• Place the appliance away from direct sunlight or heat.
Do not install appliance in a damp place.
• There is a risk of electric shock or malfunctions.
Earthing the appliance.
• If the socket is the
appliance must be earthed.
•Do not connect the earthing
wire to the gas pipes or telephone lines.
Replacing the lamp.
1.Unplug the power cord from the socket.
2.Remove Tray partition and shelf.
3.Unscrew by
4.Turn the lamp counter clockwise.
5HSODFHZLWKQHZODPSVDPHVSHFLÀFDWLRQ as original one.
Warning ! : Disconnect power supply before replacing the lamp.
SETTING UP THE REFRIGERATOR
Step 1
Clean up inside of the refrigerator with a clean cloth.
Step 2
Insert the power plug into the socket while keeping the door open for checking the interior light, then turn the temperature control button to “MAX”.
SAFETY WARNINGS
6SHFLÀFDWLRQRIHOHFWULFSRZHU 7KHHOHFWULFSRZHUVSHFLÀFDWLRQ
of the appliance is attached inside at the top of the door or outside at the back.
Do not use any extension cords or double adaptors.
• Do not plug several appliances into the same multiple power board.
This could cause over
KHDWLQJDQGWKHULVNRIÀUH
Step 3
Close the door and let the refrigerator operate for
Step 4
Check the refrigerator temperature by touching inside the freezer.
Step 5
The appropriate temperature should be controlled by turing the temperature control button to “4”, or the desired temperature can be adjustable. Now your refrigerator is ready to work.
