Samsung RF220NCTASP/ML manual To use without the water filter, Connecting to the water supply line

Cartridge Holder

Clip

Connect the water line to the fridge

1.Slip the compression nut through the plastic tubing.

2.After inserting the compression nut into plastic tubing, tighten the compression nut onto 7 mm compression fi tting (Purchased).

Household water line

Copper tubing or Plastic tubing

Filter cartridge

Plastic line (Purchased)

• You can purchase the necessary fi lter cartridge at the retailer where you purchased this refrigerator.

(Not supplied)

Ferrule

(Purchased)

Plastic Tubing

(Purchased)

(Not supplied)

Compression Nut (1/4”) (Purchased)

Bulb

Compression fitting *

Compression

Nut (1/4”) *

•Water line must be connected to drinkable water only

•When pushing the Refrigerator back, make sure you don’t roll over the power cord or water line(Icemaker supply line)

To use without the water filter

Connecting to the water supply line

•Shut o￿ the main water supply line and turn the Ice maker to the o￿ position.

•Locate the nearest cold water drinking line.

1. Cold Water line

2. Pipe Clamp.

3. Plastic line

4. Compression Nut

5. Compression Sleeve

6. Packing Nut.

7. Shut Off Valve

24_ setting up

Refrigerator

* Accesory included

Do not overtighten the compression nut.

•Using Copper Tubing

-Slip the compression nut and ferrule on copper tubing as shown.

•Using Plastic Tubing

-Insert the molded end(Bulb) of the plastic tubing into the compression fi tting.

Do not use without the molded end(Bulb) of CAUTION the plastic tubing.

3.Tighten the compression nut onto the compression fi tting.

4.Turn water on and check for any leakage.

• You can purchase the necessary fi lter cartridge at the retailer where you purchased this refrigerator.

•Water line must be connected to drinkable water only.

•When pushing the Refrigerator back, make sure you don’t roll over the power cord or water line (Icemaker supply line).

DA68-02787D.indb 24 2013.3.6 7:57:13 PM