Samsung RF220NCTASP/ML manual Safety information

ventilation.

•Ensure that it is not exposed to direct sunlight and never put it near a direct source of heat (radiator, for example).

•Never block any vents or grilles on the appliance. Allow warm food to cool down before placing it in the appliance.

•Put frozen food in the refrigerator to thaw. You can then use the low temperatures of the frozen products to cool food in the refrigerator.

•Do not keep the door of the appliance open for too long when putting food in or taking food out.

•The shorter time for which the door is open, the less ice will form in the freezer.

•Allow clearance to the right, left, back and top when installing.

•This will help reduce power consumption and keep your energy bills lower.

•To get the best energy effi ciency of this product, please leave all selves, drawers and baskets on their original position like as above illustration.

•Use only the ice maker provided with the refrigerator.

•The water supply to this refrigerator must only be installed/connected by a

14_ safety information

suitably qualifi ed person and connected to a potable water supply only.

•In order to operate the ice maker properly, water pressure of 0.1 ~ 0.7 MPa is required.

•If you have a long vacation or business trip and won’t use water or ice dispensers, close the water valve.

-Otherwise, water leakage may occur.

•Wipe excess moisture from the inside and leave the doors open.

-Otherwise, odor and mold may develop.

•Never stare directly at the UV LED lamp for long periods of time.

-This may result in eye strain due to the ultraviolet rays.

•Do not allow babies or children go inside the drawer.

-It can cause death from suffocation by entrapment or a personal injury.

•Do not sit on the Freezer door. - The door may be broken and

cause a personal injury.

•To prevent children entrapment, you must reinstall the divider using provided screw after cleaning or other actions if you removed the divider from the drawer.

DA68-02787D.indb 14 2013.3.6 7:57:6 PM