Samsung RF265AA, RF266AA instALLing tHe wAteR Line, Connecting the water line to the Refrigerator

instALLing tHe wAteR Line

Connecting the water line to the Refrigerator.

There are several items that you need to purchase to complete this connection. You may fi nd these items selling as a kit at your local hardware store.

1/4” compres
plastic tubing	ferrule	Plastic tubing
		(Supplied)

Need to purchase

Ferrule (Not supplied)

Copper tubing (Not supplied)

Compression nut (1/4”) (Supplied)

Compression fi tting (Supplied)

Compression nut (1/4”) (Not supplied)

Plastic tubing (Not supplied)

01 setting uP

1.Slip the compression nut through the supplied plastic tubing .

2.Tighten the compression nut onto the 1/4” compression fi tting.

-If you are using copper tubing, slip the compression nut (not included) and ferrule (not included) on copper tubing (not included) as shown.

-If you are using plastic tubing , insert the molded end of the plastic tubing into the compression fi tting.

3.Tighten the compression nut onto the compression fi tting. Do not over-tighten the compression nut .

4.Turn water on and check for any leakage.

Only connect the water line to a drinkable water source.

If you have to repair or disassemble the water line, cut off 1/4“ of the plastic tubing to make sure you get a snug, leak-free connection.

installing the water fi lter.

1. Remove the water fi lter cover( 1 )

2. Remove the fi xed cap by turning it counter clockwise.		1
Keep the cap in a safe place for later use if you don’t
use a fi lter.
3. Remove the water fi lter from the box and put a
replacement indicator sticker on the fi lter as shown.
Place a sticker on the fi lter that dates six months in		
the future. For example, if you install the water fi lter in
March, put the “SEP” sticker on the fi lter to remind you
to replace in September. That way you’ll know when it
is time to replace the fi lter. Normally, a fi lter life is about
6 months.
		Sticker
		(month indicator)

Setting Up _1