ADJusting tHe FReezeR DRAweR LeVeL
Adjustment part
Freezer Drawer |
1.Locate the
Unscrew the four Phillips screws ( ) slightly to loosen the door.
1 |
01 setting uP
2. Loosen the controller screw( ) with a Phillips screwdriver.
3. Find the best level to align the door slope.
CASE) The slope is about 2mm (0.08inch) as shown below.
Slope
Reference plane
- Rotate down the
- The number of the adjuster to rotate depends on the slope.
After adjustment, tighten the screws ( )&( ) in reverse order.
Setting Up _1