Using the two lever dispenser
Press the ice type or water button to select the type of you want
NO ICE
Select this if you want to turn ice maker off
02Opera ting
Using the ice Dispenser ( 1 )
Place a glass underneath the two lever dispenser and push gently against the dispenser upper lever with your glass.
Make sure the glass is in line with the dispenser to prevent the ice from bouncing out.
Using the Water Dispenser ( 2 )
Place a glass underneath the two lever dispenser and push gently against the dispenser lower lever with your glass.
Make sure the glass is inline with the dispenser to prevent the water from bouncing out.
•Before or during using, wash ice bin/bucket with a mild
caution | detergent, rinse well, and dry thoroughly it. Do not use | |
harsh or abrasive cleaners or solvents. | ||
|
•When Cubed Ice is selected after using the Crushed Ice
mode, a small amount of residual crushed ice might be produced.
• In case ice doesn’t come out, pull out the ice bucket and press the test button located on the right side of ice maker.
• Do not press the test button continuously when the tray is filled with ice or water. Water may overflow or ice jamming may occur.
•Normal Use
To fill the ice bucket to maximum capacity after installation, make sure to do the following steps.
1.Allow your refrigerator to operate and cool down for 24 hours (or 1 full day).
2.Waiting 24 hours will allow your ice maker to cool properly.
3.Dispense 4 to 6 ice cubes into the glass.
4.After 8 and 16 hours, dispense a full glass of ice.
1
2
check the water level
•When you need to press the Test button, you will hear buzzer sound
•Check the buzzer sound
Operating _29
