Maintenance
Maintenance
Handle and care
Ice bucket
If you do not dispense ice for an extended period, ice may form clumps inside the bucket. If this happens, remove and empty the ice bucket.
1. To remove the ice bucket, gently lift it up and pull out slowly while holding the bottom of the bucket with one hand and the side with the other hand.
2. Lift up and pull the bucket out. Empty the bucket.
3. When done, put the bucket back into position. If the bucket does not fit in, turn the helix screw by 90 degrees and try again.
CAUTION
•Do not apply excessive force to the bucket cover. The cover may break.
•Do not forcefully close the door. Water may spill over the ice maker.
•To prevent injury, make sure to clean up any ice or water that has fallen on the floor.
•To prevent accidents or injury, do not let children play with the water dispenser or the ice maker.
•Do not put your hand or an object into the ice chute. This may cause physical injury or product damage.
•Use only the provided ice bucket.
•Use only potable water that is connected to the water supply line.
NOTE
•The required water pressure for ice making is between 20 psi and 125 psi.
•Any sound from the ice maker is normal, which outputs during the ice making process.
•While the door is open, neither the ice maker nor the water dispenser operates.
58 English
