Maintenance
Maintenance
3. Insert a new filter cartridge. Use only
4. Turn the cartridge knob clockwise to lock into place.
5. On the Home screen, tap Fridge Manager > Fridge Settings > Water Filter, and then select RESET.
The filter indicator turns off.
6. When replacing is complete, open the water valve and run water through the dispenser for about 7 minutes. This is to remove impurities and air from the water line.
NOTE
•A newly installed filter may cause the water dispenser to spurt water briefly. This is because of air entering the waterline.
•This replacement process cause the refrigerator to drip water onto the floor. Simply wipe up with dry cloths.
Reverse osmosis water filtration system
The water pressure of the water supply system to a reverse osmosis water filtration system must be between 35 psi and 120 psi (241 kPa and 827 kPa).
The water pressure of the reverse osmosis water filtration system to the refrigerator’s cold water line must be at least 40 psi (276 kPa). If the water pressure is below the specified:
•Check if the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.
• | Refill the water tank in the reverse osmosis system with water. |
• | If your refrigerator has a water filter, it may further reduce the water pressure when |
| used in conjunction with a reverse osmosis system. Remove the water filter. |
For more information or servicing, contact a licensed plumbing professional.
64 English
