4.Draw back the clamp as shown.
5.Connect the wire connectors.
CAUTION
•Make sure the wire connectors are connected properly. Otherwise, the display does not operate.
6.Connect the water tube.
CAUTION
•To prevent water leaks, make sure the red clips tighten the coupler properly.
•Keep the clips out of children’s reach.
7.Repeat the above steps for the other door.
8.Attach the top cover with the front side first, and then press down on its back to fit into position. Then, tighten the screws (x3).
Installation
English 33
|
| ||
|
| ||
|
|
|
|