To correct the door gap
Door gaps can be corrected using the gap bolt on the top right corner of the refrigerator.
1. With the door closed, use a Phillips screwdriver to remove 3 screws on the top cover with the wire connectors.
2. Use a 4 mm Allen spanner (not provided) to correct the door gap between two doors.
- To widen the gap, turn the gap bolt clockwise.
- To narrow the gap, turn the gap bolt counter clockwise.
3. When complete, reinsert the top cover.
CAUTION
The electrical connectors must be intact during this process. Use caution not to tangle the connector wires or peel off the coating.
Installation
