setting up your refrigerator
How to reverse the door (OPTION)
Unplug the refrigerator or disconnect the power.
setting01 up
1.Remove 3 screws on the hinge cover.
2.Disassemble the hinge cover.
5.Disassemble the upper hinge by removing 3 bolts on each side with the 10mm wrench.
1.Avoid the wire damage.
2.Fridge door is possible to tip over at this time.
3.Disassemble 2 connectors. (a housing and a reed switch)
6.Remove each fridge doors by lifting it up.
1.Possible to drop or scratch the door at this time.
2.Middle hinge cap may come off with the door.
4.Disassemble ground wire by removing 1 screw on each side.
7.Disassemble middle hinge cap.
Cap
Cover
8.Remove 1 screw and 2 bolts of each side (use Ø5mm allen wrench).
1.At first, Remove left side middle hinge and right side.
2.Be careful not to drop the freezer door.
9. Remove the freezer door | 10. | Remove 2 screws. |
by lifting it up. | 11. | Separate front leg Cover. |
1.Possible to drop or scratch the door at this time.
2.Low hinge cap may come off with the door.
setting up _19