setting up your refrigerator

making minor adjustments between doors

Remember, a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the Refrigerator.

When the left door is lower than the right door.

When the left door is higher than the right door.

Adjustment part

Adjustment part

1.Pull out the freezer drawer ( 1 ), then you can see the middle hinge ( 2 ) .

2.Insert the supplied hex wrench ( 3 ) into the shaft ( 4 ) of the middle hinge.

3.Please adjust the height by turning the hex wrench ( 3 ) clockwise ( ) or counter-clockwise ( ).

2

 

3

3

4

1

When you turn the hex wrench counter-clockwise ( Only the left-door height is adjustable for Swing-Type.

), the door will move up.

1.After adjusting the doors, please insert the supplied fastener ( 5 ) using Pliers ( 6 ) in the gap between the hinge-grommet ( 7 ) and the middle hinge ( 8 ). The number of fasteners you’ll need to insert depends on the gap.

2 fastener are enclosed with the refrigerator. The thickness of each fastener is 1.0mm.

24_ setting up