setting up your refrigerator
Connecting the water line to the refrigerator
1.Remove the cap from water line on the unit and insert compression nut to the water line on the unit after disassembling from provided water line.
2.Connect both water line from the unit and water line in the kit.
3.Tighten the compression nut onto the compression fitting. There should be no gaps between (A, B & C )
4.Turn water on and check for any leakage.
|
| Water Line |
|
| from unit |
| Remove |
|
| cap | No gap |
|
| |
Loosen a |
| Water Line |
|
| from unit |
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing to make sure you get a snug,
After the water supply has been installed check all the joints to ensure there are no leaks.
caution
•Samsung Warranty does not cover THE WATER LINE INSTALLATION.
•The cost of the water line installation is at the customers expense,
unless the retailer has covered this expense in the delivery charge.
• Please contact a Plumber or Authorized Installer for the installation if needed.
• If Water leakage occurs due to improper installation, Please contact installer.
setting01 up
setting up _13