Reassembling the freezer door (DRAWER TYPE)

Slot

1.Pull out the rails to the full length on each sidle of the cabinet evenly.

2.Hang the freezer door front onto open slot on the sides.

3.With the 10mm wrench, reattach 4 bolts to connect the rail with the door.

4.Replace the drawer box.

Reassembling the freezer door (SWING TYPE)

1.Place the hole in the bottom of the freezer door over the right side low hinge.

2.Replace the middle hinge connected to the freezer.

3.Insert and tighten the screw into the left and right middle hinges with a philips screwdriver(+). Insert and tighten the 2 hex head bolts into the left and right middle hinges with an allen wrench(Ø5mm).

4.Replace the cap on the middle hinge.

18_ setting up