Samsung RFG237AARS Operating your French Door Refrigerator, RFG238 MODEL, Using the Power Cool

Operating your French Door Refrigerator

(RFG238 MODEL)

Controlling the fridge temperature

The fridge temperature can be set between 7℃ and 1℃ to suit your particular needs. Press the fridge button repeatedly until the desired temperature is shown in the temperature display. The temperature will move -18℃degrees each press(3℃ → 2℃ → 1℃ → 7℃ → 6℃ → 5℃ → 4℃ → 3℃). The temperature control process for the fridge works just like the freezer process. Press the fridge button to set your desired temperature. After a few seconds, the fridge will begin adjusting towards the newly set temperature. This will be reflected in the digital display.

Using the Power Cool

For a quick Fridge cool down, use the Power Cool function. Press and hold the Fridge/Hold 3 sec for Power Cool button for 3 seconds. Then, the power cool indicator will light and activate the power cool mode independent of fridge set temperature. If you select Power Cool, the inside temperature of the fridge will decrease for about two and a half hours or until -4℃is reached. Press and hold the button for 3 seconds again to cancel the Power Cool mode. Then, the indicator will go out and the Refrigerator will return to the set temperature again.

- The temperature of the Freezer, fridge or Pantry Room may rise when you open the doors too frequently, or if a large amount of warm or hot food is placed inside.

- This may cause the digital display to blink. Once the Freezer and fridge temperature return to their normal set temperatures, the blinking will stop.

- If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance, wait for around 10 minutes and then plug the power cord back in.

-If there is an communication error between the Display and Main Controller, the Pantry Display light may blink. Once the normal set temperatures are reached, the blinking will stop.

If the blinking continues for a long period of time, please contact a Samsung Electronics Service Center.

USING THE COLD WATER DISPENSER

Press the Ice type or Water button to select the type of you want

02 OPERATING

No ICE

Select this if you want to turn ice maker off.

Using the ice Dispenser

Place a glass underneath the ice dispenser and push gently against the dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the ice from bouncing out.

	Please wait 2 seconds before removing the glass under the dispenser to prevent
CAUTION	spills. If the Refrigerator door opens, the Dispenser does not work.	PUSH
	When Cubed Ice is selected after using the Crushed Ice mode, a small amount of
CAUTION	residual crushed ice might be produced.
		Operating _29

DA68-01827C-16.indb 29 2013. 12. 10. �� 5:01