Samsung RFG296HDRS user manual Changing the Water Filter, Water filter usage

Cooling Off Mode

Cooling Off mode (also called Shop mode), is designed for use by retailers when they are displaying refrigerators on the shop floor. In Cooling Off mode, the refrigerator's fan motor and lights work normally, but the compressors do not run, and the refrigerator and freezer do not get cold.

To start Cooling Off mode, touch and hold the Energy Saver button and the Power Freeze button for 5 seconds during normal operation. The refrigerator chime sounds and the temperature display flashes OF OF.

To cancel Cooling Off mode, touch and hold the Energy Saver and the Power Freeze buttons again for 5 seconds.

CHANGING THE WATER FILTER

To reduce risk of water damage to your

WARNING property DO NOT use generic brands of water filters in your SAMSUNG Refrigerator.

USE ONLY SAMSUNG BRAND WATER FILTER. SAMSUNG will not be legally responsible for any damage, including, but not limited to property damage caused by water leakage from use of a generic water filter. SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filter.

The Filter light turns red to let you know when

it is time to change your water filter cartridge.

( 9 ) Ice Off

If you don’t want to make more ice, touch the Ice Off button.

The icon will light up and the Ice-Maker stops making ice.

We recommend you stop ice making if the following occur:

-There is enough ice in the ice bucket.

-You want to save water and energy.

-Water is not being supplied to the

refrigerator.

If the ice maker function is ON, and the water Line is not connected, there will be a water valve noise from the

back of the unit, press the Ice Off

(Hold 3sec for child lock) button for less than 3 seconds until the Ice Off

Indicator ( ) illuminates.

To give you time to get a new filter, the red
light comes on just before the capacity of the
current filter runs out. Changing the filter on	(Red)
time provides you with the freshest, cleanest
water from your refrigerator.

1. Shut off the water supply. Then, turn the water filter ( 1 ) about 1/4 turn, counter-clockwise.

2. Pull the water filter ( 1 ) from the case filter ( 2 ).

2

1

If you do not press any button(letters not ICON), the display turns off in a few seconds.

If you press any button(letters not ICON), the display lights up again.

The function key will operate after you remove your finger from the letters except E.Saver, Ice and Water key.

( 10 ) Filter	Water filter usage
	This icon will light up when you need to
	change the filter. After you use about 300
	gallons of water, the filter indicator lights
	up. (about 6 months). After you install the
	new water filter, reset the filter indicator
	by touching the Alarm/hold 3 sec for Filter
	Reset button.

•If water is not dispensing or dispensing slowly, you need to replace the water filter because the water filter is clogged.

•Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly.

12_ operating

•To change the water filter more easily, shut off the water supply valve.

•Sometimes, it is hard to disassemble the water filter because impurities in the water cause it to stick. If you are having difficulties, grip the water filter firmly and pull it hard.

•When you pull the water

filter, a little water can	2
leak from the opening.
This is normal. To	3
minimize the water
leaks, keep the filter
cartridge horizontal when you pull it.

•To prevent overflow, empty the water filter tray ( 3 ) and dry around the filter case ( 2 ).

3. Insert the new filter into the filter case ( 4 ).

4. Push the filter, and then turn it clockwise until it locks.

•If you have trouble inserting the water filter because of high water pressure, shut off the water supply valve.

DA68-02488A-11.indb 12 14. 5. 14.

�� 11:45