Setting up your French Door Refrigerator
| 3 | |
2. Disconnect two connectors ( 3 ) at each | 4 | |
side of the top cap, the one connector | ||
| ||
( 7 ) on right side door and the other | 3 | |
connector ( 4 ) on left side door. Remove |
| |
the tube ( 5 ) with pressing the dark gray | 7 | |
color part ( 6 ) of the water line coupler. | ||
| ||
If a red clip is on the coupler, it must | 5 | |
| ||
CAUTION be removed before removing the tube. | 6 |
3. Remove the 3 hex head bolts ( 7 ) attached to the upper | 8 |
| |
left and right door hinges with a wrench(10mm). | 7 |
With a Philips head screwdriver, remove the ground |
|
screw ( 8 ) attached to the upper left and right door | 9 |
hinges. |
|
Remove the upper left and right door hinges ( 9 ). |
|
4. Lift the door straight up to remove.
5.With a Philips head screwdriver, remove the screw ( 10 ) attached to the lower left and right door hinges.
With a wrench(3/16”), remove the two hex head bolts ( 11 ) attached to the lower left and right door hinges.
Remove the lower left and right door hinges ( 12 ).
12
10
11
10_ Setting Up
