Setting up
Reattaching the front leg cover
NOTE
Before attaching the cover, check water connector for leakage.
Replace the front leg cover by turning the three screws clockwise, as shown in the figure.
Setting up
Levelling the refrigerator
Now that the doors are back on the refrigerator, you will want to make sure the refrigerator is level so you can then make final adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even.
NOTE
The front of the refrigerator is also adjustable.
When the freezer door is lower than the fridge
Insert a
Leg
Screw Driver
When the Freezer door is higher than the fridge
Leg Screw Driver
Insert a
NOTE
Refer to the next section for the best way to make very minor adjustments to the doors.
28 English
2015. 4. 1. |
�� 10:58