Samsung RH56J6917SL/EF manual Controlling the temperature

Operating

Display Off Function

To energy conservation the Panel Display turns off automatically under the following conditions:

When no button has been pressed, when no doors are open, or when no Dispenser Lever has been pushed.

However, the icon indicating your Vacation or Cubed / Crushed / Ice Off, will stay on. When you press a button, open a door, or push Dispenser Lever, the Panel Display will turn on again.

Except for the Ice Type button, all function buttons will become operational after you remove your finger from the button you are currently pressing.

Controlling the temperature

	Controlling the Freezer temperature
Operating	The freezer temperature can be set
	between -15 °C and -23 ºC to suit your
	particular needs. Press the Freezer button
	repeatedly until the desired temperature is
	shown in the temperature display. Keep in
	mind that foods like ice cream may melt at
	-16 ºC.
	The temperature display will move
	sequentially from -15 °C and -23 ºC. When
	the display reaches -23 ºC, it will begin
	again at -15 ºC.
	Five seconds after the new temperature is
	set the display will again show the actual
	current freezer temperature. However, this
	number will change as the Freezer adjusts
	to the new temperature.

40  English

NOTE

Bottom drawer in freezer is two star section.

The Bottom door guard and Middle door guard in ther freezer are two star section. So, the Temperature in the two star sections are slightly higher than other freezer compartment.

Controlling the fridge temperature

The refrigerator temperature can be set between 7 ºC and 1 ºC to suit your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display.

The temperature control process for the Fridge works just like the Freezer process. Press the Fridge button to set your desired temperature.

After a few seconds, the Fridge will begin tracking towards the newly set temperature.

This will be reflected in the digital display.

NOTE

The temperature of the freezer or the refrigerator may rise from opening the doors too frequently, or if a large amount of warm or hot food is placed in either side.

This may cause the digital display to blink. Once the freezer and refrigerator return to their normal set temperatures the blinking will stop.

If the blinking continues, you may need to “reset” the refrigerator.

Try unplugging the appliance, wait about 10 minutes and then plug back in.

DA68-03176L-01.indb 40 2015. 4. 1.

�� 10:58