Setting up
To refit the ice bucket
90°
Figure2
Settingup | Normal operation |
|
Ice Chute
•Assemble it in the reverse order of disassembly.
•Push the bucket in firmly until you hear a clicking sound.
•When the bucket does not fit into its place, turn the gear handle on its back by 90 degrees and reinstall it again as shown in figure 2.
•Any sounds you hear when the ice maker dumps ice into the bucket are part of normal operation.
•Not dispensing ice for long periods may cause ice clumps in the ice bucket. Remove the remaining ice and empty the bucket.
•When ice does not come out, Check for any ice stuck in the chute and remove it.
•The first batch of ice cubes may be small due to air in the pipe after connection, any air will be purged during normal use.
32 English
2015. 4. 1. |
��
10:58
