Samsung RL-A760 manual Answering Calls, To answer an incoming call

You can also place calls from your Sprint PCS Phone by using Sprint PCS Voice CommandSM (page 153), Speed Dialing numbers from your Contacts (page 29), and using your Call History listings (page 80).

Tip: To speed dial a phone number from standby mode, press and hold the speed dial number. If the speed dial number is two digits, enter the first digit, then press and hold the second digit. (For information on setting up speed dial numbers, see “Assigning Speed Dial Numbers” on page 86.) (This feature will not work when you are roaming off the Sprint Nationwide PCS Network; when roaming you must dial using eleven digits [1 + the area code + the seven-digit phone number.])

Answering Calls

To answer an incoming call:

1.Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.)

2.Press or to answer an incoming call. (Depending on your phone’s settings, you may also answer incoming calls by

opening the phone or by pressing any number key. See “Call Answer Mode” on page 49 for more information.)

Your Sprint PCS Vision Phone notifies you of incoming calls in the following ways:

The phone rings or vibrates (unless set to Silence All).

The LED flashes.

The backlight illuminates.

The screen displays an incoming call message.

If the incoming call is from a number stored in contacts, the entry name is displayed. The caller’s phone number may also be displayed, if available.

The following options are also available:

Press to quiet the ringer.

Press and hold the volume key to send the incoming call to your voicemail box or press once to silence the ringer.

Section 2A: Your Sprint PCS Vision Phone - The Basics 23