![](/images/new-backgrounds/1238090/23809011x1.webp)
INSTALLATION AND POSITIONING NOTES
The ground on which the refrigerator is placed should be flat and firm. If some unevenness exists, the refrigerator level can be adjusted through rotating the adjustable feet under the refrigerator body (counterclockwise direction means rising).
At the bottom of the adjustable foot is an adjustable hole which can be easily inserted by simple tools such as philips driver, etc. for the regulation. (see left picture)
Above 300mm
| The distances between the wall and the back and the side of |
| refrigerator should not be less than 55mm. The height above |
Above 55mm | the top should not be less than 300 mm. |
The refrigerator should be kept away from the heat source, and avoid the direct sunlight.
Please remove the door seal before disposing of the refrigerator to avoid any accidents.
5
MAINTENANCE AND CLEANING
Internal accessories
Take out all shelves, door shelves, crisper, covers, drawers, etc., and clean them with soft cloth moistened with
or neutral cleanser (for dishes). After using the cleanser,they
must be cleaned with clean water and be wiped up with a dry cloth.
The door seal
Please clean the door seal carefully and the groove is cleaned with a wood chopstick entangling with cotton strip.
When inserting the door seal after cleaning, the four corners should be secured firmly and the door seal is inserted it sect by sect.
Defrosting methods
When a lot of ice or frost stayed on the evaporator of the CoolSelect Zone and the freezer, the freezing function will be affected and the power consumption
is increased. When the frost layer on the evaporator gets thicker, the refrigerator must be defrosted. It is advised to defrost twice a year.
PRECAUTIONS
1.Before defrosting, the refrigerator must be disconnected from the power;
2.The good time for defrosting is when the Freezer and the CoolSelect Zone is entirely or nearly empty;
3.If there is still some food in the Freezer and the CoolSelect Zone before defrosting, the refrigerator can enter into the Super Freeze function. About 2 hours later, the food temperature will decrease to a very low level which where the food can be kept freshly for some time;
4.Before defrosting, please be sure to take out all the foodstuff in the drawers of the Freezer and the CoolSelect Zone and store them in the cooling place. Defrosting must be done as soon as possible (the longer the food is placed under room temperature, the more unsuitable for the
5.Do not defrost the Freezer with metal or sharp tools in case they may damage the refrigerator;
6.Do not defrost the Freezer using an electric heater;
7.After defrosting, please be sure to clean the Freezer thoroughly;
Notes for inside and outside cleaning of the refrigerator
-The power plug must be removed from the outlet before cleaning, the interval time between plugging and unplugging should be more than 5 minutes;
-When cleaning, no water is allowed to enter into the lamp box and the control panel cover;
-Clean with soft cloth dipped with
-Clean the water drainage channel and the weep hole at the bottom of the Fridge and the CoolSelect Zone frequently to ensure the smooth drainage;
-Do not use the detergent containing abrasive (such as toothpaste), acid content, chemical solvents (such as alcohol) or polishing for cleaning.
PRECAUTIONS Please do the following inspection after the maintenance :
-If there is crack or damage on the power wire.
-If the power plug has been inserted into the socket correctly.
-If there is any abnormal heatin the power plug etc..
10