ADJUSTING THE HEIGHT BETWEEN THE DOORS

Making small adjustments between doors.

If the door of fridge is lower than that of the freezer,

adjustment part

1)If you open the Fresh Select Zone Door (), you can see the hinge-mid ().

2)Insert enclosed hex wrench () into the shaft () of the hinge mid.

3)Please adjust the height difference between the doors turning the hex wrench () clockwise ( )

or counter clockwise ( ).

When you turn counter clockwise (

), the door goes up.

NOTE

 

4) After adjusting the doors, please insert enclosed fastener-ring ( ) using a plier ( ) in the gap between the hinge-grommet ( ) and the hinge-mid ( ).

The number of the fastener-ring to insert depends on the gap.

Four fastener-rings are enclosed with the refrigerator.

NOTE

22