CHECKING THE WATER DISPENSER LINE

1)In order to operate the ice maker properly, water pressure of 20 ~125 psi (0.138~0.862Mpa) is required. In this range, a 6 oz paper cup can be filled in 10 secs.

2)The water filter removes particles. It does not sterilize or destroy any micro-organisms.

3)If the refrigerator is installed in an area with low water pressure (below 20psi), you should install a booster pump to compensate.

4)Ensure the water storage tank inside the refrigerator is properly filled initially. Push the water dispenser lever until the water runs from the outlet.

A universal water supply kit is available at extra cost from your dealer. The refrigerator manufac- NOTE turer recommends using a water supply kit containing copper tubing.

INSTALLATION INSTRUCTIONS

31