When installing, servicing, or cleaning CAUTION behind the refrigerator, be sure to pull the
unit straight out and push back in straight after finishing.
Also, make sure your floor supports the full- load refrigerator.
Otherwise, it may cause floor damage.
Please tie up the extra length of the power CAUTION cord at the back of the refrigerator so as
not to be touched on the floor preventing the power cord from being crushed by the rollers upon relocation.
FLOORING
For proper installation, this refrigerator must be placed on a level surface of hard material that has the same height as the rest of the flooring.
This surface should be strong enough to support a fully loaded refrigerator.
To protect the floor finish, cut a large section of the cardboard carton and place it under the refrigerator where you are working.
Pulling or pushing the refrigerator may damage the floor.
Moving the refrigerator after installation may damage the floor.
LEVELLING THE REFRIGERATOR
To avoid a hazard due to instability of the refrigerator, please place the refrigerator on a horizontal support and levelled in accordance with the following instruction for installation.
Failing to do so may result in the refrigerator tipping and a personal injury.
If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily.
Case 1) The appliance tilts down to the left.
•Turn the left adjusting leg in the direction of the arrow until the appliance is level.
Case 2) The appliance tilts down to the right.
•Turn the right adjusting leg in the direction of the arrow until the appliance is level.
English - 10
2014. 8. 4. |
��
5:04
