Samsung RS261MDBP SETTING UP the refrigeratorCONT’D, Reattaching the water supply line

Models: RS261MDPN RS261MDRS RS261M RS261MDWP RS261MDBP

1 32
Download 32 pages 15.7 Kb
Page 12
Image 12
SETTING UP the refrigerator(CONT’D)

setting up your side-by-side refrigerator

SETTING UP the refrigerator(CONT’D)

If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.

Removing the Front Leg Cover

First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the three screws counter-clockwise.

Removing the Front Leg Cover FRONT LEG COVER

SCREW

Separating the water supply line from the refrigerator

1.Remove the water tube by pressing the coupler 2 and pulling the water tube 1 away.

Separating the water supply line from the refrigeratorReattaching the water supply lineManual background2

1

Manual background Do not cut the water line. Gently separate it from the coupler.

Reattaching the water supply line

1. While pressing the front face of coupler

Line

2 , insert the water line 1 in the coupler.

 

 

 

 

 

 

 

 

Carefully place front cover and push to

 

 

 

 

 

 

 

 

snap it into position.

 

 

 

 

 

1

Coupler

2

Line

Manual backgroundManual backgroundManual background Coupler

The water line must be fully inserted to the marked line to prevent water leakage from the dispenser.

12_ setting up

Page 12
Image 12
Samsung RS261MDBP, RS261MDWP SETTING UP the refrigeratorCONT’D, Separating the water supply line from the refrigerator