Samsung RS261MDWP, RS261MDBP, RS261MDRS, RS261MDPN user manual Making mInor adjustments to the doors

Models: RS261MDPN RS261MDRS RS261M RS261MDWP RS261MDBP

1 32
Download 32 pages 15.7 Kb
Page 16
Image 16
Making mInor adjustments to the doors

setting up your side-by-side refrigerator

Making mInor adjustments to the doors

Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on levelling the refrigerator.

When the door of the freezer is higher than the fridge When the door of the freezer is higher than the fridge

Manual backgroundManual background Adjustment part

In the case of the process to correct the imbalance is the same. Open the doors and adjust them, one at a time, as follows:

1. Unscrew the nut 1 from the lower hinge until it reaches the upper end of the bolt 2 .

3 Wrench

2 Bolt

1 Nut

When you release the nut 1 , make sure that you use the hex wrench provided 3 to loosen the

bolt 2 in a counter-clockwise Manual background direction. You should then be able to unscrew the nut

1with your fingers.

2.Adjust the height difference between the doors by turning the bolt 2 clockwise Manual background or counter

clockwise Manual background .

3 Wrench

2 Bolt

Manual background When you turn clockwise Manual background , the door will move up.

3.After adjusting the doors, turn the nut 1 clockwise bolt, then tighten the bolt again with the wrench 3

Manual background until it reaches the lower end of the to fix the nut in place 1 .

3 Wrench

2 Bolt

1 Nut

If you do not secure the nut firmly, the bolt may release.

16_ setting up

Page 16
Image 16
Samsung RS261MDWP, RS261MDBP, RS261MDRS Making mInor adjustments to the doors, setting up your side-by-side refrigerator