Samsung RS261MDRS In S Tallin G T He W Ater Line, setting up your side-by-side refrigerator

setting up your side-by-side refrigerator

IN S TALLIN G T HE W ATER LINE

Connecting the water line to the Refrigerator.

There are several items that you need to purchase to complete this connection.

You may find these items sold as a kit at your local hardware store.

•	1/4” compression nut	•	plastic tubing
•	copper tubing	•	ferrule

Assembled)

Assembled)

1.Tighten the compression nut into the 1/4” compression fitting.

- If you are using copper tubing, slip the compression nut	(not included) and ferrule (not included)
on copper tubing (not included) as shown.

-If you are using plastic tubing , insert the molded end(Bulb) of the plastic tubing into the compression fitting.

Do not use without the molded end(Bulb) of the plastic tubing	.
CAUTION
2. Tighten the compression nut into the compression fitting. Do not over-tighten the compression nut		.

3.Turn water on and check for any leakage.

Only connect the water line to a drinkable water source.

If you have to r 1/4” of the plastic tubing to make sure you get a snug, leak-free connection.

18_ setting up