Removing the freezer door

A few things to mention fi rst.

Make sure that you lift the door straight up so the hinges are not bent or broken.

Be careful not to pinch the water tubing and wire harness on the door.

Place doors on a protected surface to prevent scratching or damage.

Is necesary two people for disassembling doors.

1.With the Freezer door closed, remove the upper hinge cover 1 using a screwdriver, and then disconnect the wires 2 .

2

1

Be careful, no damage sensor harness with cover hinge.

2. Remove hinge bolts 3

with a 10 mm Socket Wrench and a ground screw 4 counter-clockwise, and

take off the upper hinge

5

in the direction of the arrow. Be careful when removing the door to ensure

that it does not fall on you.

4

 

 

3

 

 

5

3. Before remove the bolts desassembling Cover Leg front and hoses. Open the Freezer door before lifting it up. Remove the door from the lower hinge 6 by carefully lifting the door 7 .

7

6

4.Remove the lower hinge 8 from the lower hinge bracket 9 by lifting the lower hinge in the direction of the arrow.

8

9

Make sure to put the water line through the lower hinge before assembling it.

CAUTION

Reattaching the freezer doors

To reattach the freezer doors, replace parts in reverse order.

CAUTION

setting up _15

UP SETTING 01

DA68-02535D(0.0).indb 15

2013.3.8 11:0:15 AM