A water dispenser is one of the helpful features on your new Samsung Refrigerator. To help promote better health, the Samsung water fi lter removes unwanted particles from your water. However, it does not sterilize or destroy microorganisms. You may need to purchase a water purifying system to do that.
In order for the ice maker to operate properly, a water pressure of 138~862 kPa is required. Under normal conditions, a 170 cc (5.75 oz.) paper cup can be fi lled in 10 seconds.
If the Refrigerator is installed in an area with low water pressure (below 138 kPa), you can install a booster pump to compensate for the low pressure.
Make sure the water storage tank inside the Refrigerator is properly fi lled. To do this, press the water dispenser lever until the water runs from the water outlet.
Water line installation kits are include with unit. You can fi nd it in freezer drawer.
Parts for water line Installation
UP SETTING 01
1 Water line fixer | 2 Pipe connector | 3 Water line |
and screws |
|
|
1.First, shut off the main water supply line.
2.Locate the nearest cold, drinking water line.
3.Follow the Water line Installation Instructions in the installation kit.
Close Main
Water pipe
Close Main | NO GAP |
Water pipe |
|
4.After connecting the water supply to the water fi lter, turn your main water supply back on and dispense about 3 L to clear and prime the water fi lter.
The water line must be connected to the cold water pipe. If it is connected to the hot water pipe, it may CAUTION cause the purifi er to malfunction.
setting up _19
2013.3.8 11:0:26 AM |