setting up your
MAKING MINOR ADJUSTMENTS TO THE DOORS
Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on levelling the refrigerator.
When the door of the freezer is higher than the fridge
Adjustment part
Open the doors and adjust them, one at a time, as follows: |
|
| |
1. Unscrew the nut 1 from the lower hinge until it reaches the upper end of the bolt | 2 . | ||
| 3 | Wrench | |
|
| 2 | Bolt |
| 1 | Nut | |
When you release the nut | 1 , make sure that you use the hex wrench provided | 3 | to loosen the bolt 2 |
in a | direction. You should then be able to unscrew the nut | 1 with your fi ngers. | |
2.Adjust the height difference between the doors by turning the bolt 2 clockwise 
or counter
clockwise 
.
3 Wrench
2 Bolt
When you turn clockwise 
, the door will move up.
3.After adjusting the doors, turn the nut tighten the bolt again with the wrench
1clockwise 
until it reaches the lower end of the bolt, then
3 to fi x the nut in place 1 .
3 Wrench
2 Bolt
1 Nut
If you do not secure the nut fi rmly, the bolt may release.
18_ setting up
2013.3.8 11:0:21 AM |