setting up your side-by-side refrigerator

INSTALLING THE WATER DISPENSER LINE(CONT’D)Connecting the water line to the refrigerator

1.Remove the cap from water line on the unit and insert compression nut to the water line on the unit after disassembling from provided water line.

2.Connect both water line from the unit and water line in the kit.

3.Tighten the compression nut onto the compression fi tting. There should be no gaps between (A, B & C)

4.Turn water on and check for any leakage.

 

Water Line

 

from unit

 

Remove

 

cap

 

No gap

Loosen a

Water Line

 

from unit

Only connect the water line to a drinkable water source.

CAUTION

If you have to repair or disassemble the water line, cut off 6.5 mm of the plastic tubing to make sure you get a snug, leak-free connection.

Before being used, the leakage in these places should be examined.

• Samsung Warranty does not cover WATER LINE INSTALLATION.

• It will be done at customer’s charge unless the retail price includes installation cost.

• Please contact Plumber or Authorized Installer for the installation if needed.

•If Water leakage occurs due to improper installation, please contact installer.

When using power cord

To prevent power cord damage, after product installation, arrange the remaining power cord to the unit cover and fi x.

Non operation

During operation

20_ setting up

DA68-02535D(0.0).indb 20

2013.3.8 11:0:27 AM