Samsung RS53K4400SA/EF manual Lamps

Models: RS53K4400SA/EF

1 120
Download 120 pages 39.24 Kb
Page 55
Image 55

NOTE

A newly installed filter may cause the water dispenser to spurt water briefly. This is because air has entered the waterline.

This replacement process may involve the refrigerator to drip water onto the floor. If this happens, wipe up with dry cloths.

Reverse osmosis water filtration system

The water pressure of the water supply system to a reverse osmosis water filtration system must be between 35 psi and 120 psi (241 kPa and 827 kPa).

The water pressure of the reverse osmosis water filtration system to the refrigerator’s cold water line must be at least 40 psi (276 kPa). If the water pressure is below the specified:

Check if the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

Refill the water tank in the reverse osmosis system with water.

If your refrigerator has a water filter, it may further reduce the water pressure when

 

used in conjunction with a reverse osmosis system. Remove the water filter.

For more information or servicing, contact a licensed plumbing professional.

Ordering a new filter

To purchase a new water filter (part type: HAFEX/EXP), contact a local Samsung service

centre.

Lamps

The lamps are not user-serviceable. To replace the lamps of the refrigerator, contact a

 

local Samsung service centre.

Maintenance

 

English  55 

Untitled-14 55

2016-10-25 ￿￿ 3:28:43

Page 55
Image 55
Samsung RS53K4400SA/EF manual Lamps