Installation
STEP 7 Connect the water dispenser line (applicable models only)
Before installation (CoolSelect models only)
1.Remove any residual matter inside the purifier.
2.Turn the main water supply on.
3.Run an approximate 3 litres of water through the dispenser for flushing reasons.
The water may look dark or ice may come out until the flushing is complete, which is normal.
Parts and tools required
Installation
Water line fixer and screws | Pipe connector | Water line |
Purifier | Purifier |
Installation (external dispenser line)
1. Assemble the water pipe line using couplers.
2. Close the main water supply, and then close the water tap.
3. Connect the coupler to the cold water tap.
CAUTION
•Make sure you connect the coupler to the cold water tap. Connection to the hot water
tap may cause the purifier to be clogged and fail to operate normally.
•The warranty for your refrigerator does not cover the water line installation. The water line installation will be performed at your own costs unless the installation fee is included in the retailer’s price.
•Samsung takes no responsibility for the water line installation. If water leaks occur, contact the installer of the water line.
•The water line must be repaired by a qualified professional. If you encounter a water leak, contact a local Samsung service centre or the installer of the water line.
34 English
