IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using electrical products, basic cautions should always be followed, including the following:

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any of the ventilation openings. Install in accordance with manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding plug. The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point they exit from the apparatus.

11.Note for UK only: If the colors of the wires in the mains lead of this unit do not correspond with the terminals in your plug‚ proceed as follows:

a)The wire that is colored green and yellow must be connected to the terminal that is marked by the letter E‚ the earth symbol‚ colored green or colored green and yellow.

b)The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black.

c)The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red.

12.Only use attachments/accessories provided by the manufacturer.

13.Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a

cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

14.Unplug this apparatus during lightning storms or when unused for long periods of time.

15.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

16.Never break off the ground pin. Write for our free booklet “Shock Hazard and Grounding.” Connect only to a power supply of the type marked on the unit adjacent to the power supply cord.

17.If this product is to be mounted in an equipment rack, rear support should be provided.

18.Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in suscep- tibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. The U.S. Government’s Occupational and Health Administration (OSHA) has specified the following permissible noise level exposures:

Duration Per Day In Hours

Sound Level dBA, Slow Response

8

90

6

92

4

95

3

97

2

100

1 1/2

102

1

105

1/2

110

1/4 or less

115

According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Ear plugs or protectors to the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss, if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation.

SAVE THESE INSTRUCTIONS!

3

Page 2 Page 4
Page 3
Image 3
Peavey ICS 4200 user manual Important Safety Instructions
Page 2 Page 4

ICS 4200 specifications

The Peavey ICS 4200 is a cutting-edge digital audio processor that has gained recognition for its versatility and powerful features in the professional audio industry. Designed to meet the demands of commercial audio applications, the ICS 4200 provides a range of advanced functionalities tailored for sound reinforcement and installation environments.

One of the main features of the ICS 4200 is its multi-channel configuration, allowing users to manage and control up to four separate zones or audio outputs. This flexibility is crucial for venues that require targeted audio distribution, such as theaters, auditoriums, and conference centers. The processor supports both analog and digital inputs, ensuring seamless integration with a variety of audio sources, including microphones, musical instruments, and media players.

In terms of processing power, the ICS 4200 is equipped with state-of-the-art algorithms that provide high-quality audio shaping and enhancement. The built-in equalizer offers comprehensive control over frequency response, enabling sound engineers to tailor the audio to the specific acoustics of the venue. Additionally, the unit features sophisticated dynamics processing capabilities, including compression and limiting, which are essential for maintaining audio integrity and preventing distortion.

The ICS 4200 also incorporates advanced signal routing options, making it possible to create complex audio scenarios with ease. Its user-friendly interface, combined with software control options, allows for straightforward programming and monitoring of audio settings. This is especially beneficial for system integrators, who can adjust parameters remotely or through a digital control panel.

Another standout characteristic of the ICS 4200 is its integration with Peavey's proprietary media and networking technologies. The device can be part of an extensive audio network, allowing for interoperability with other Peavey equipment and third-party systems. This network capability enhances the overall functionality of the audio setup, providing a more cohesive and efficient user experience.

Furthermore, the ICS 4200 is designed with durability in mind. Its robust construction ensures reliability in demanding environments, and with features like thermal management systems, the processor operates efficiently under prolonged use.

In conclusion, the Peavey ICS 4200 stands out as a powerful and flexible audio processor that is well-suited for a variety of professional audio applications. With its multi-channel capabilities, advanced processing features, user-friendly interface, and networking options, the ICS 4200 is an excellent choice for anyone seeking high-quality audio solutions in commercial installations. Whether for live sound reinforcement or fixed installations, it delivers performance and reliability that meet the needs of audio professionals.
Top Page Image Contents