Samsung RSA1D*** Remove any residual matter inside the filter. Model with the filter, setting up

Models: RSA1D*** RSA1S*** RSA1N*** RSA1U*** RSA1Z***

1 40
Download 40 pages 16 Kb
Page 19
Image 19
Remove any residual matter inside the filter. (Model with the filter)

setting up your side-by-side refrigerator

PU E

Select the location where the filter is to install. (Model with the filter)

- If you wish to reassemble the water inlet and out- let sides of the filter during filter installation,

see the reference illustration.

-Cut the water line attached to the filter to the appropriate place after measuring the distance between the filter and the cold water tap.

LINE OUTLET

SIDE OF

90 degree

FILTER

 

FILTER WATER

REFERENCE

STTING01

WATER INLET

COUPLER

SIDE OF FILTER

 

Remove any residual matter inside the filter. (Model with the filter)

-Open the main water tap to check whether water is running through the water tube on the water inlet side of the filter.

-If water does not come out through the line, check whether the tap is open.

-Leave the tap open until clean water is running out and any residual matter that built up during manufacturing has been removed.

OUTLET SIDE

FILTER

OF FILTER

WATER

WATER LINE

 

Attach the filter lock stations.

TWO FILTER LOCK

STATION

-Hold the filter lock stations in the appropriate position (under the sink for example) and fix it tightly into place where to screw.

TWO FILTER LOCK

STATION

Secure the filter in position.

-Fix the filter in position, as shown in the figure on the right.

WATER TUBE

 

FILTER

FILTER

LOCK

 

 

STATIONS

TIGHTENING

 

BAND

 

setting up _19

Page 19
Image 19
Samsung RSA1D*** Remove any residual matter inside the filter. Model with the filter, Attach the filter lock stations