IPL T SF24, IPL T SFI244 • Specifications, Part #s, AccessoriesIPL T SF24, IPL T SFI244 • Specifications, Part #s, Accessories
Specifications, Part Numbers, Accessories, cont’d
Digital inputs
Input voltage range......... 0-24VDC, clamped at +30VDC
Input impedance.............. 28 kohms
Programmable pullup..... 2 kohms to +5VDC
Threshold low to high .... Programmable range: 100 mV to 24VDC,
default = 2VDC
Threshold high to low .... Programmable range: 100 mV to 24VDC,
default = 1VDC
Digital outputs ............................. 250 mA sink from 24VDC max.
Analog inputs............................... 12 bit A/D, 0 to 24VDC
Pin configurations ....................... 1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = GND
IR/serial (IR/S) control interface — IPL T SFI244 only
Output port number.................... 4
Connectors.................................... (1) 3.5 mm 8-pole captive screw connector
IR output carrier frequency........ 30 kHz to 1 MHz
Pin configurations ....................... pins 1, 3, 5, 7 = S 1, S2,S 3,S 4
pins 2, 4, 6, 8 = GND
General
Power............................................. 100VAC to 240VAC, 50/60 Hz, 10 watts,
external, autoswitchable; to 12VDC, 1 A
power supply. Product requires 0.5 A.
Alternatively, the product can use power
supplied over LAN/Ethernet (802.3af,
class 2).
Temperature/humidity.............. Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, non-condensing
Rack mount................................... Yes, with optional 1U rack shelf, part
#60-190-01, or the VersaTools rack shelf,
part #60-190-20;
also under-furniture mountable with
optional brackets #70-212-01
or projector mountable with optional
brackets #70-217-01/70-077-04
Enclosure type.............................. Metal
Enclosure dimensions................. 1.7" H x 4.3" W x 3.0" D
(1U high, quarter rack width)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
Product weight............................. 0.7 lbs (0.3 kg)
Shipping weight .......................... 2 lbs (1 kg)
Specifications
Ethernet control interface
Connectors.................................... 1 RJ-45 male connector
Data rate........................................ 10/100Base-T, half/full duplex with
autodetect
Protocols........................................ ARP, DHCP, ICMP (ping), TCP/IP,
Telnet, HTTP, SMTP
Default settings............................ Link speed and duplex level =
autodetected
IP address = 192.168.254.254,
subnet mask = 255.255.0.0,
default gateway = 0.0.0.0
DHCP = off
Serial control interface
Port number/type
IPL T SF24......................... 2 RS-232/RS-422/RS-485 configurable
serial
IPL T SFI244...................... 2 RS-232 only
Connectors
IPL T SF24......................... (2) 9-pin male D and
(1) 3.5 mm 10-pole captive screw
connector
IPL T SFI244...................... (1) 3.5 mm 5-pole captive screw connector
Baud rate and protocol ............... 300 to 115200 baud
Default settings (adjustable): 9600, 8-bit,
1 stop bit, no parity
Pin configurations
Serial, 9-pin D
RS-232 (default)........ 2 = RX, 3 = TX, 5 = GND, 7 = RTS, 8 = CTS
RS-422........................ 2 = RX-, 3 = TX-, 5 = GND, 7 = TX+, 8 =
RX+
RS-485........................ 2&3 = data- and tie 2&3, 5 = GND,
7&8 = data+ and tie 7&8
Serial, 5-pole captive screw
COM1: pin 1 = TX, 2 = RX, 3 = GND
COM2: pin 4 = TX, 5 = RX, 3 = GND
Flex I/O control interface
Number/type............................... 4 analog or digital (configurable)
Connectors.................................... (1) 3.5 mm captive screw connectors,
5 pole
A-3A-2