Samsung RSA1U***, RSA1Z***, RSA1N***, RSA1S*** Removing The Freezer Accessories, operating, Block

Models: RSA1D*** RSA1S*** RSA1N*** RSA1U*** RSA1Z***

1 40
Download 40 pages 16 Kb
Page 31
Image 31
REMOVING THE FREEZER ACCESSORIES

REMOVING THE FREEZER ACCESSORIES

Cleaning and rearranging the interior of the freezer is a snap.

1. Remove the Glass Shelf by pulling the shelf out as far as it will go. Then, gently lift it up and remove it.

 

In case it does not have hooks itself in the back

Hook

Block

 

side for not being tilted,a shelf should be placed

 

CAUTION

 

 

deeply in a proper position where there are blocks

 

 

 

for shelves as shown. if not, the shelf can fall out

 

 

 

of a refrigerator.

 

 

2. Remove the Door Bin by holding the door bin with both hands and then gently lift it up.

3. Remove the Plastic Drawer by pulling it out and slightly lifting it up.

4. Remove the Icemaker Bucket by lifting up and pulling it out.

5. Remove the Front Leg Cover by opening both the freezer Blockdeeply in a proper position where there are blocksfor shelves as shown. if not, the shelf can fall outManual background and refrigerator doors, and removing the three screws. Once Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background the screws are free, detach the cover. To reattach the front Manual backgroundManual backgroundManual backgroundManual backgroundManual background leg cover, place it back in its original position and tighten the Manual backgroundManual backgroundManual backgroundManual backgroundManual background three screws.Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background

Do not use excessive force when removing the cover.

Otherwise, the cover may break and cause injury.

02 OPERATING

operating _31

Page 31
Image 31
Samsung RSA1U*** Removing The Freezer Accessories, operating, Block, deeply in a proper position where there are blocks