Using Basic Phone Functions

3

 

Using Phone Hardware and Accessories (Cisco SPA 303)

 

 

 

 

 

Using Phone Hardware and Accessories (Cisco SPA 303)

Using the Speakerphone

To use the speakerphone, press the Speaker button (the handset can be either on or off hook).

Using the Headset with Your IP Phone

Install the headset as described in the “(Optional) Connecting Wired and

Wireless Headsets” section on page 18.

NOTE Steps to use your headset with the IP phone may vary. Consult the user documentation for your headset for more information.

Press the Headset button on your phone and dial the number to place a call, or press the headset button to answer a ringing call.

Switching Between the Handset/Headset/Speakerphone

During a Call

Any of these audio devices can be used during a call. Only one device at a time can be used.

The handset can be on the hook when using the speakerphone or headset function. If switching from the handset to the speakerphone, make sure the speakerphone or headset light is illuminated before placing the handset back on the hook.

Adjusting Call Volume and Muting

Adjusting Call Volume

Cisco SPA 301

With the headset off the phone, press the Vol. button repeatedly to increase the volume. When the volume reaches the maximum, the next button press reduces the volume to the minimum.

Cisco Small Business IP Phone SPA 30X User Guide (SPCP)

29

Page 31
Image 31
Cisco Systems 30X Using Phone Hardware and Accessories Cisco SPA, Adjusting Call Volume and Muting, Using the Speakerphone