CHECKING THE WATER DISPENSER LINE
1)In order to operate the ice maker properly, water pressure of 1.4 ~10
is required. In this range a 100 cc paper cup can be filled in 10 secs.
2)The water filter removes particles. It does not sterilize or destroy any
3)If the refrigerator is installed in an area with low water pressure (below 1.4
), you should install a booster pump to compensate.
4)Ensure the water storage tank inside the refrigerator is properly filled initially. Push the water dispenser lever until the water runs from the outlet.
| Water line installation kit is available at extra cost from your dealer. The refrigerator |
NOTE | manufacturer recommends using a water supply kit containing copper tubing. |
|
Checking the Parts
Basic parts
Water Filter | Wrench |
Optional parts
Cap Nut | Connector | Packing | Connector | Packing |
| (1/2 ) | (1/2 ) | (3/4 ) | (3/4 ) |
Tapping screw(12EA) | Clamp(12EA) | Water pipe |
INSTALLATION INSTRUCTIONS
27
