SAFETY INSTRUCTIONS

DANGER! RISK OF CHILD ENTRAPMENT

WARNING

Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous...even if they will sit for "just a few days."

Do so in a way, that is not possible for a child to remain trapped inside.

If you are getting rid of your old refrigerator, please follow the instructions below to help prevent acci- dents.

Keep fingers out of the “pinch point” areas;

Clearances between the doors and cabinet are necessarily small. Be careful closing doors when children are in the area.

PROPER DISPOSAL OF THE REFRIGERATOR

Before you throw away your old refrigerator or freezer

SAFETY INSTRUCTIONS

When disposing of this or other refrigerator/s, remove the door/door seals, door latch so that small children or animals cannot become trapped inside.

Leave the shelves in place so that children may not easily climb inside.

R600a or R134a is used as a refrigerant.

CycloPentane used as a insulation blowing gas.

The gases in the insulation material require special disposal procedure. Please dispose of the packaging material for this product in an environmentally friendly manner. Please contact your local authorities in regard to the environmentally safe dis- posal of this product. this product contains flammable insulation blowing gas. contact your local authority in regard to safe dis- posal of this product.

Check the compressor label on the rear of the appliance or the rating label inside the fridge to see which refrigerant is used for your refrigerator. when this product contains flammable gas (Refrigerant R600a) contact your local authority in regard to safe disposal of this product.

The refrigerant used in the refrigerator/freezer and the gases in the insulation material require special disposal procedures. Ensure that none of the pipes on the back of the appliance are damaged prior to disposal.

CAUTIONS

HOW TO CONNECT ELECTRICITY

WARNING

The refrigerator should always be plugged into its own individual electrical outlet which has a volt- age rating that matches the rating plate.

This provides the best performance and also prevents overload- ing house wiring circuits, which could cause a fire hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Make sure that the power plug is not squashed or damaged by the back of the refrigerator.

Do not bend the power cord excessively or place heavy articles on it.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. If

the power cord is damaged, have it replaced immediately by the manufacturer or its service agent.

When moving the refrigerator, be careful not to roll over or damage the power cord.

Do not insert the power plug with wet hands.

Unplug the refrigerator before cleaning and mak- ing repairs.

Do not use a wet or damp cloth when cleaning the plug. Remove any foreign matter or dust from the power plug pins.

Otherwise there is a risk of fire.

If the refrigerator is disconnected from the power supply, you should wait for at least five minutes before plugging it back.

Pull the power plug out of the socket before changing the interior light of the refrigerator.

Otherwise, there is a risk of electric shock.

If the wall socket is loose, do not insert the power plug.

There is a risk of electric shock or fire.

3

Page 3
Image 3
Samsung RSE8KPPS1/XEP manual HOW to Connect Electricity