MAKING MINOR ADJUSTMENTS TO THE DOORS

Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on levelling the refrigerator.

When the door of the freezer is higher than the fridge

Adjustment part

In the case of the process to correct the imbalance is the same. Open the doors and adjust them, one at a time, as follows:

1.Unscrew the nut 1 from the lower hinge until it reaches the upper end of the bolt 2 .

3 Wrench

2 Bolt

1 Nut

When you release the nut 1 , make sure that you use the Allen wrench provided 3 to loosen the bolt 2 in a counter-clockwise direction. You should then be able to unscrew the nut 1 with your fi ngers.

2.Adjust the height difference between the doors by turning the bolt 2 clockwise or counter

clockwise .

3 Wrench

2

Bolt

When you turn clockwise , the door will move up.

3.After adjusting the doors, turn the nut 1 clockwise bolt, then tighten the bolt again with the wrench 3

until it reaches the lower end of the to fi x the nut in place 1 .

3 Wrench

 

2

Bolt

1

Nut

 

If you do not secure the nut fi rmly, the bolt may release.

14_ setting up

DA99-01746A(EN)-1.7.indd Sec4:14

2013.2.28 10:14:30 AM

Page 14
Image 14
Samsung RSG257AAWP Making Minor Adjustments to the Doors, When the door of the freezer is higher than the fridge