overloading house wiring circuits, which could cause a fi re hazard from overheated wires.

•Make sure that the power plug is not squashed or damaged by the back of the refrigerator.

•Do not bend the power cord excessively or place heavy articles on it.-This constitutes a fi re hazard.

• Have the power cord repaired or replaced immediately by the manufacturer or its service agent if power cord has become frayed or damaged.

• Do not use a cord that shows cracks or abrasion damage along its length or at either end.

• If the power cord is damaged, have it replaced immediately by the manufacturer or its service agent.

• When moving the refrigerator, be careful not to roll over or damage the power cord.

• Do not insert the power plug with wet hands.

• Unplug the refrigerator before cleaning and making repairs.

• Do not use a wet or damp cloth when cleaning the plug.

• Remove any foreign matter or dust from the power plug pins.

-Otherwise there is a risk of fi re.• If the refrigerator is disconnected

from the power supply, you should wait for at least ten minutes before plugging it back.

•If the wall socket is loose, do not insert the power plug.-There is a risk of electric shock or fi re.

•The appliance must be positioned so that the plug is accessible after installation.

• The refrigerator must be grounded.-You must ground the refrigerator to prevent

any power leakages or electric shocks caused by current leakage from the refrigerator.

• Never use gas pipes, telephone lines or other potential lightening rods as ground.

-Improper use of the ground plug can result in electric shock.

•Do not dissemble or repair the refrigerator by yourself.-You run risk of causing a fi re, malfunction and/or personal injury.

•If you smell pharmaceutical or smoke, pull out power plug immediately and contact your Samsung electronics service center.

safety information _05