1Preparations
Icons | Description |
|
|
Adjust the screen brightness.
Volume can be adjusted if a cable is connected to the [DP IN] or [HDMI
IN] port.
Confirm a menu selection.
Pressing the [
] button when the OSD menu is not displayed will change the input source (Digital/DisplayPort/HDMI). If you power on the
product or change the input source by pressing the [ 
] button, a message that shows the changed input source will appear at the top left corner of the screen.
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
The [ 
] button opens the ECO menu directly. You do not need to go to SETUP&RESET - ECO.
Turn the screen on or off.
Power lamp | The power indicator will be lit when the product is operating normally. |
|
z Refer to "9.2 PowerSaver" for details about the
zTo reduce power consumption, it is best to remove the power cable when you will not be using the product for an extended period of time.
1 Preparations 22
