PictBridge •Reset
Initialises user-changed configurations.
1. Use the Up /Down buttons to select the
[Reset] menu tab. And then press the Right
button.
2. Use the Up /Down buttons to select the
desired sub menu value, andthen press the
OK button.
If[No] isselected :Settings will not be
reset.
If[Yes] isselected :All printand image settings will bereset.
Default print setting varies depending on the printer manufacturer.
For your printer's default setting, refer to the user's guide that came
with your printer.
important notes
Be sure to observe the following precautions!
This unit contains precision electronic components. Do not use or
store this unit in the following locations.
-Areas exposed tosevere changes intemperature and humidity.
-Areas exposed to dust and dirt.
-Areas exposed to direct sunlight orthe inside ofa vehicle inhot
weather.
-Environments where there ishigh magnetism or excessive vibration.
-Areas with high explosives orhighly flammable materials.
Donot leave this camera in places subject to dust, chemicals (like
naphthalene and mothballs), high temperature and high humidity.
Keep this camera with silica get in ahermetically sealed boxwhen not
planning to use the camera for a long period of time
Sand can be particularly troublesome tocameras.
-Do not letsand getinside the camera when using it on beaches,
coastal dunes, or other areas where there is lots of sand.
-Doing somay result in failure ormay permanently render the cam-
era unusable.
Handling the camera
-Never drop the camera or subject it to severe shocks or vibrations.
-Protect the large size LCD monitor from an impact. When this
camera is notused, keep it inthe camera case.
-Avoid obstructing the lens orthe flash when you capture an image.
-This camera is not waterproof.
Toavoid dangerous electrical shocks, never holdor operate the
camera with wet hands.

PLAY(69}