02 RECORDING
41
RECORDING_
Drive mode How to use the wise shot
1. Select the ASR mode by rotating the mode
dial.
2. Select the wise shot in the [DRIVE] menu.
3. Press the Shutter button to take i mages.
4. The captured images are displayed.
-To select an image, press the Left/Right
button.
-Press the E button and you can check the enlarged image by pressing
the 5 function button.
- Press the E button again and the image is enlarged automatically.
-You can zoom in and out the enlarged image area by using the W/T
button.
5. Press the OK / Shutter button and the selected image will be saved.
DRIVE
Wise Shot
High resolution and picture quality increases fi le saving time, which
increases stand-by time.
If the [Continuous]. [Motion Capture] or [AEB] sub menu is selected,
the fl ash will be off automatically.
If less than 3 pictures are available in the memory, the AEB shooting is
not available.
It is best to use a tripod for the AEB shooting as the time to save each
image fi le is longer and blurring caused by camera shake may occur.
In the Wise shot mode, the shutter speed value shown on the LCD
monitor may be different to the actual shutter speed.
If ( ¬ ) or ( ) image size is selected, the Wise Shot menu can't be
selected.
Image with
Flash
Enlarged
image
Image with the
ASR mode
Enlarged
image
Save Move
OK E