82 _PLAY
Playback (ø ) PictBridgeWhen this menu is selected without inserting a memory card, the [No
Card] message will be displayed.
If there is not enough space available in the memory card to copy
saved images in the internal memory (About 19 MB), the [Copy To
Card] command will copy only some of the images and display [Memory
Full!] message. Then the system will return to the playback mode.
Please be sure to delete any unnecessary files to free up space before
inserting the memory card into the camera.
When you move the images that are stored in the internal memory by
doing [Copy To Card] to the card, the next number of file names will be
created in the card to avoid duplication of the file name.
- When the [Reset] of the [File] setup menu is set : The copied file
names start from after the last stored file name.
- When the [Series] of the [File] setup menu is set : The copied file
names start from after the last captured file name. After completing
[Copy To Card], the last stored image of the last copied folder is
displayed on the LCD monitor.
You can use the USB cable to connect this camera to a printer that
supports PictBridge (sold separately) and print the stored images directly.
Movie clips and voice files cannot be printed.
Connecting the Camera to a Printer
Setting up the camera for connection to
the printer
1. Connect the camera and printer with USB
cable.
2. Select the [Printer] menu by pressing Up /
Down button and press the OK button.
Select USB
Computer
Printer
Confirm
OK